Workshop Drawer Cabinet Dividers
Workshop Drawer Cabinet Dividers. Kits and accessories for the T736 range of workshop drawer units. Tool compartments and dividers for the 600x600mm sized tool storage cabinets that are part of the premium range of workshop drawer cabinets you can find here at equiptowork.com.
Internal drawer components to facilitate the storage potential of each drawer in your workshop storage cabinet.
Organise and maintain the order of tools, technical equipment and many other components with a choice of cabinet accessories:
Plastic Small Parts Trays
Plastic Divider Troughs
Metal Dividers - slot into the pre-formed pitch slots in each T736 drawer for optimum organisation and adjustability.
Please note the Divider and Box accessories on offer here, are only suitable for the 600mm x 600mm drawer sizes used on the T736 - 705 x 736mm drawer cabinets. For other drawer sizes and other accessory combinations, please contact us for further details using the contact apps shown on this page.
Workshop Tool Drawer Divider Sets
Kit 1 - Plastic Divider Set comprising - 150x150mm sized sections high-quality plastic channel troughs and dividers. 4 x 4 channel sections, 8 x 3 channel sections, 4 x 2 channels sections plus 40 x cross divider sections - to make multiple partition combinations. Only suitable for drawer heights 75-100mm H.
Kit 2 - Plastic Tray Set comprising - plastic drawer trays/boxes: 8 x 150x150mm, 8 x 75x150mm, 16 x 75x75mm, 32 no. boxes in total - suitable for drawer heights 75-100mm H.
Kit 3 - Plastic Tray Set comprising - plastic drawer trays/boxes: 12 x 150x150mm, 4 x 75x150mm, 8 x 75x75mm, 24 no. boxes in total - suitable for 75-100mm H drawers.
Kit 4 - Metal Divider Set comprising galvanised sheet steel sections to partition individual drawers: 2 x walls 600mm L and 8 x cross dividers - sets only suitable for 100mm drawer heights.
Kit 5 - Metal Divider Set comprising galvanised sheet steel sections to partition individual drawers: 2 x walls 600mm L and 4 x cross dividers - only suitable for 100mm drawer heights.
Kit 6 - Metal Divider Set comprising galvanised sheet steel sections to partition individual drawers: 1 x wall 600mm L and 2 x cross dividers - only suitable for 100mm drawer heights.
Kit 7 - spec. as Kit 4 except suitable for 150mm high drawer units.
Kit 8 - spec. as Kit 5 except suitable for 150mm high drawer units.
Kit 9 - spec. as Kit 6 except suitable for 150mm high drawer units.
Drawer Insert - fluted rubber drawer insert, size: 600mm x 600mm for T736 drawer cabinets, oil resistant.
Unsure which accessory kit will fit your drawers ? - just contact us via the contact form for more info.
We also offer:
Bolt on plinths to enable the forks on a fork lift or pallet truck to lift the cabinet. This can prove to be an essential addition when moving fully loaded cabinets.
Workshop Drawers can also be supplied complete with top quality Tool Sets inlayed on foam inserts that house each individual tool. Ask us for more details on the superb range of Matador workshop tools available for the Bedrunka+Hirth drawer cabinet storage systems.